Construction Company – TRC Concrete Driveway Phoenix
When you’re building something real – an addition, a garage, a foundation – you need concrete that’s more than just flat and gray. You need it level, strong, reinforced, and built to hold up over time. That’s what we do at TRC Concrete Driveway Phoenix. We handle everything from structural footings to full slab-on-grade pours. We’ve worked with builders, homeowners, and contractors all across Phoenix. We don’t skip steps or eyeball stuff—we measure, form, and pour it like it’s gonna carry real weight. ‘Cause it is.
Get A Free Quote!
Get A Free Quote!
Concrete Pouring for Room Additions
Adding a room? Don’t even think about framing or drywall until the concrete’s right. We handle concrete pouring for room additions that start strong and stay strong. No shortcuts. No soft spots. We build the slab right so your whole addition don’t shift, crack, or sink later on.
Most room additions in Phoenix need a slab that ties into the house. We check the grade, cut into the existing slab if needed, pour new footings, and level everything to match. Some homes are old and uneven, so we adjust the pour to make it square with the new walls. Had a job out in Alhambra where the house was built in the ‘70s and not a single angle was straight. We formed the new slab, matched the old one, and made it look like it was all poured at once.
We also handle post-tension slabs if needed, rebar for stem walls, or extra depth if the addition’s going two stories. Just tell us what’s going on top, and we’ll make sure the concrete underneath can handle it.
Permits? Yeah, we help with that too. We’re not just throwin’ mud—we’re making a foundation for real construction.
Slab-on-Grade Construction
Most homes in Phoenix are built on slab-on-grade, and it’s what we pour almost every day. This is the flat slab that sits right on the ground, usually reinforced and poured in one go. If you’re building a house, garage, guest house, or even a casita, you’re probably gonna need this kind of slab.
We do slab-on-grade for new builds, home additions, and rebuilds after demo. One job in Desert View was a detached guest house in a big backyard. We dug footings, compacted the base, laid vapor barrier, rebar, and poured a 5” thick slab with edge beams. Passed inspection the next day and looked clean.
We make sure to slope for drainage, level it to match future flooring, and include anchor bolts or sleeves where needed for plumbing or electric. Every little thing matters—if your slab’s off, your walls and floors will be too. We don’t mess that up.
Concrete Work for Home Additions
When you’re adding a bathroom, bedroom, or back room, you need concrete work for home additions that ties right into what’s already there. We make sure your new slab don’t feel like a separate room—it matches, connects, and holds strong for whatever you’re buildin’.
Phoenix homes come in all shapes—older ones have weird slabs, new ones have post-tension cables, and sometimes there’s no access for machines. We’ve done jobs all over Phoenix where we hand-dug footings in tight spots, mixed on-site, and poured in sections to match the existing house.
One guy near Encanto was adding a new laundry room to the side of his house. We cut into his old slab, laid new rebar, formed a stem wall, and poured a flat surface to match the existing grade. When the tile went in, you couldn’t even tell where old ended and new began.
We work with your GC or builder too. If your framer or plumber needs sleeves or anchor bolts, we’ll get it right before they even show up.
Client Reviews
Structural Concrete Services
When it comes to structural concrete, there’s no room for mistakes. This ain’t your average patio pour—this is the kind of concrete that holds up walls, supports roofs, and keeps buildings from falling apart. We do structural concrete services for Phoenix homes and small commercial builds that need real strength from the ground up.
We’ve poured footings, columns, beams, foundation walls, and elevated slabs with full rebar cages and exact measurements. We follow plans from your engineer or designer and don’t cut corners—ever. We’ve done structural work for garages, retaining walls, stairways, load-bearing walls, and even custom home builds in Ahwatukee, Central Phoenix, and out by Desert Ridge.
One client in South Phoenix was building a steel-frame shop in his backyard. His engineer needed specific footing depth and rebar spacing for the columns. We set forms, installed all the cages, poured with 4000 PSI mix, and got it done same week. Passed inspection, no issues.
We work with inspectors, engineers, and GCs to make sure the structure is built solid. Doesn’t matter if it’s residential or light commercial—when we pour structural concrete, it’s done to last.
Residential Flatwork Construction
If it’s flat and made of concrete, we pour it. Residential flatwork covers all the basics—driveways, patios, walkways, steps, garage floors, pads—anything flat around your house. We do clean, smooth flatwork that holds up in Phoenix weather and still looks good after years of sun, dust, and wear.
Flatwork might sound simple, but it ain’t just throwing concrete around. You gotta prep it right, grade the base, set solid forms, and pour fast and even. Especially out here, where the heat dries stuff out mid-pour. Our crew works quick and clean to make sure it finishes smooth with no cold joints, weird lines, or early cracks.
We did a big job over in Biltmore—front driveway, backyard patio, two walkways, and a pad for a shed. Took us four days total, and the customer said it was the cleanest crew he ever worked with. Everything matched, all the lines were straight, and it drained perfect.
Whether you need a small path or a full slab layout, we bring the tools and the crew to knock it out quick. We offer broom finishes, stamped textures, colored concrete, salt finishes—whatever fits the look you’re goin’ for.
Ready to get that flatwork knocked out? Hit us at (602) 560-4139 and let’s talk concrete.